Popular Prints, Made to Order
A curated catalogue of the most-requested 3D printed designs - workshop organisers, planters, tabletop accessories, lithophanes and replacement parts.
All printed to order in Perth from open-source and original designs, with full attribution to the original creators.
Home & LivingBridge Bookend
Two 3D printed stone abutments hold your books as the span of a miniature bridge.
Most bookends just stop books falling over. This one turns your whole shelf into a piece of architecture. The set is two mirrored bridge abutments, each with brick coursing, arched…
Home & LivingBull Bookends
A sculpted bull strides straight through your shelf, holding your favourite reads in 3D printed PLA+.
Some bookends just sit there. This one commits to the bit: a sculpted bull split clean in two, with the head and shoulders bracing one end of your books and…
Home & LivingCactus Vase
Chubby green segments, soft touch-safe spikes and stem openings for dried blooms, minus the watering.
Some plants demand a watering schedule, a sunny corner and your ongoing guilt. This one asks for nothing. Our cactus vase is 3D printed as a plump, ribbed cactus in…
Home & LivingCamelpot
A textured, desert inspired planter 3D printed in PLA+, sized to cradle a small succulent or trinket.
Meet the CamelPot, a small desert wanderer that doubles as a plant stand. Its body is printed in a warm, sandy terracotta tone with a fine textured surface that reads…
Home & LivingCandle Holder V1
A pocket-sized urn wrapped in vintage floral scrollwork, ready to hold a tea light on any shelf.
Every candlelit table needs one small, show-stopping piece, and this little urn does the job in one glance. It is shaped like a miniature vase, wide in the belly and…
Home & LivingCandle Holder V2
A ribbed, orb-shaped silhouette in matte black PLA+ that turns a simple tealight into a warm, sculptural glow.
Picture a candle holder that looks like it grew rather than got printed. This piece takes on a rounded, orb-like body wrapped in deep spiral ribs that twist from a…
Home & LivingCandle Holder V3
A hand finished PLA+ shell with a scalloped rim that scatters candlelight across the room.
Picture a little lantern with a waistline: our tealight holder curves out into a full, rounded belly, then narrows again at a crimped, zigzag rim, all wrapped in a diamond…
Home & LivingCandle Holder V5
A softly ribbed, hand-sized holder that turns a single tealight into cosy table light for evenings at home.
Every good candlelit evening starts with a steady base, and this fluted barrel tealight holder gives a single tealight a proper little stage. The exterior is finished in a row…
Home & LivingCarla | Pendant Light
A 3D printed diamond shaped shade with spiralling flutes that glow amber over dinner tables and reading corners.
The Carla pendant light takes a simple diamond silhouette and sets it spinning: dozens of fine ribs twist around the shade from the ceiling cap down to a woven textured…
Home & LivingCarmen Table Lamp - Solid Version
A sculpted RippleMesh base and scalloped shade that turn warm light into a soft woven glow.
Some lamps light a room. Carmen changes how it feels. This 3D printed table lamp wraps a curvy, vase-like base and a scalloped shade in a dimpled RippleMesh texture, so…
Home & LivingCarrot Coaster
Ridged orange coasters stack into a plump carrot, with green leaf stirrers hiding in the top.
Some coasters sit in a drawer until guests arrive. This one sits on the coffee table looking like a prize-winning carrot. Ridged orange discs stack into a plump carrot body,…
Kids & EducationalChicken Clicker
Bright three point comb and a snug yellow beak, printed in smooth PLA+ for palms and pockets.
There is a reason a good fidget toy earns a permanent spot on your desk: it gives restless hands somewhere to go. This little chicken face does exactly that, a…
Art & DecorChinese Purse
A 3D printed tribute to traditional carved cinnabar lacquer art, made in PLA+ for a shelf or desk.
Some pieces are meant to be held, others are meant to be looked at. This one is firmly the second kind. Shaped like a rounded, handled purse, its whole surface…
Home & LivingCoffee Bookmark
A tipped mug pours a glossy coffee drip down the page, a fun gift for coffee-loving readers.
Every reader has done it: knocked the mug, watched the coffee run, and groaned. This little bookmark turns that exact disaster into the joke. A tiny mug tips right off…
Home & LivingCrystal Vase
Faceted quartz-point geometry, 3D printed in PLA+, that turns any bunch of flowers into a centrepiece.
Some vases hold flowers. This one stages them. The crystal cluster vase is a ring of faceted, low-poly quartz points rising to different heights, so the tips crown the rim…
.jpg)
Art & DecorDavid - Lamp
A PLA+ lamp built from stacked rings that glow from within, casting warm light across a familiar face.
Michelangelo's David has stared out from marble for over five centuries, but nobody has lit him from the inside before. This lamp deconstructs the sculpture's head into a tower of…
Art & DecorDavid Purse
Michelangelo's David, Cupid and a Greek column wrapped around one matte PLA+ shelf-stealing bag.
Some objects earn their shelf space by being useful. The David Purse earns it by being unforgettable. Michelangelo's most famous face gazes out from one side, a goddess turns away…
Home & LivingDega Lampshade
A finely textured shade that turns a bare globe into warm, ambient light for any lounge room.
Some lampshades just cover a bulb. This one turns it into the warmest thing in the room. The Ripple Weave shade is 3D printed as a single cone, its surface…
Home & LivingArchangel Mini Shelf
A robed angel with wide feathered wings, carved as a small wall shelf for candles or trinkets.
Perched against the wall like a stone guardian pulled from a cathedral facade, the ArchAngel Mini Shelf brings serious gothic drama to a small footprint. A robed figure spreads two…
Home & LivingArrecife
A rippling, reef inspired vase that hides a glass insert and doubles as a desk organizer.
Some vases just hold flowers. Arrecife holds attention. Inspired by the layered folds of a coral reef, its ruffled rim breaks into dozens of overlapping waves before the whole piece…
Home & LivingAurora Lampshade
A softly fluted shade that turns a plain bulb into a warm glowing sculpture for your side table.
Some lamps light a room. This one decorates it. The Aurora shade takes on a gentle gourd silhouette, narrowing at the waist before swelling into a rounded dome, with fine…
Home & LivingAviator Planter Pot
A rugged shearling-collar jacket planter 3D printed in PLA+, with a removable vase for effortless watering.
Every desk needs one item that makes visitors stop and ask questions, and this is ours. The Aviator Bomber Jacket Planter Pot recreates a classic flight jacket right down to…
Home & LivingBabushka Vase
Three graduated vases with a rippling chevron texture that nest together like a set of babushka dolls.
Some vases just hold flowers. This one holds your attention. Each piece in this nesting trio is printed with a rolling chevron texture, wave stacked on wave around the cylinder…
Home & LivingBaby Cheeses Prank
Tiny cheese wedges made to hide around the house for a prank that keeps paying off for weeks.
One tiny yellow wedge started an accidental family prank that is still going weeks later. Our maker printed a handful of these little cheese wedges and hid them around their…