Popular Prints, Made to Order
A curated catalogue of the most-requested 3D printed designs - workshop organisers, planters, tabletop accessories, lithophanes and replacement parts.
All printed to order in Perth from open-source and original designs, with full attribution to the original creators.
Home & LivingBambulab Led 001 - Base
A 3D printed PLA+ base that turns your Bambu Lab LED 001 puck into a glowing accent lamp.
If you have already got a Bambu Lab LED 001 sitting in a drawer, this is the base that finally gives it a job. Rather than leaving that little puck…
Home & LivingBarbamama Vase
A hand-finished PETG vase with spiralling ribs that catch the light, perfect for a single statement stem.
Every good bud vase starts with a good curve, and this one has curves for days. The Barbamama vase twists from a slim, single-stem neck down into a fuller, onion-shaped…
Home & LivingBaron Wall Pot
A carved wall mounted planter with a baroque crown and scroll medallion, built for balconies, courtyards and renters short on floor space.
The Baron Wall Pot looks like it was chiselled from plaster, not printed. A crenellated zigzag band runs around the collar like the top of a garden urn, and beneath…
Home & LivingBase L 122 Vasemode
A ribbed decanter silhouette in warm PLA+ that works as a bedside lamp base or, unwired, as a sculptural vase.
There is something satisfying about a shape that does not need to explain itself, and this fluted bottle lamp base is exactly that. Fine vertical reeding runs unbroken from its…
Home & LivingBase S Vasemode (35mm / 42mm Socket)
A ribbed bottle silhouette for exposed filament bulbs, 3D printed in tough ABS for warm bedside glow.
Some lamp bases hide the bulb. This one puts it on a pedestal. The fluted vase lamp base takes its cue from an hourglass bottle, with a rounded shoulder that…
Home & LivingBell Pendant Lamp
3D printed in soft white PLA+, its vertical ribs cast warm light and shadow into any room.
Some lampshades just cover a bulb. This one puts on a show. The Fluted Bell Pendant Lamp Shade tapers from a narrow neck to a rounded shoulder like a ceramic…
Home & LivingBerg B Mini Shelf
A faceted iceberg carved into a floating shelf, printed in PLA+ to display your favourite small trinkets.
Some shelves just hold things. This one looks like it calved off a glacier and decided to hold your things instead. The Berg Mini Shelf is a low-poly iceberg silhouette,…
Home & LivingBerry Flower Vase
Soft ribbed bumps cluster like berries down the body, a tactile PLA+ vase for dried stems.
Look closely and you will see why we call it the berry vase: rows of soft, swelling ribs press together down the body like berries bunched on a stem, pinching…
Home & LivingBerry Planter Pot
A bumpy, berry-textured pot for your favourite succulent, 3D printed in durable PETG Basic.
Every bump on this planter looks like it grew there. We designed it as a tight cluster of rounded berries stacked in three plush tiers, so instead of a plain…
Home & LivingBlob Mushroom Lampshade
A vase mode fluted mushroom shade that glows warm light through every rib, printed in smooth PLA+.
There is something delightfully odd about a mushroom that lights up. This lampshade takes the classic blob mushroom silhouette (wide dome, pinched waist, flared foot) and turns it into a…
Home & LivingBlob Vase
A chunky cluster of ridged blobs in smooth PLA+, ready for dried stems or trailing greenery.
Picture a cluster of smooth bubbles stacked into rows, each one ringed with fine ridges you can trace with a fingertip. That is the Blob Vase: a chunky, textured piece…
Home & LivingBook-shaped Bookend Planter
A hollow, book-spined planter pair that holds up your favourite reads and grows a succulent on top.
Every book lover has the same shelf problem: paperbacks that slump sideways the second the stack gets thin. This bookend planter duo solves it twice over, propping your reading pile…
Home & LivingBookend Planter With Water Reservoir
Two speckled stone-look planters that hold your favourite paperbacks upright while nursing succulents or trailing greenery.
Your bookshelf has a plant problem: not enough of them. This bookend planter duo solves that by fusing a sturdy fan-ridged arch, which does the actual job of holding your…
Home & LivingBotella Vase
A wave-textured, bottle-shaped vase in tough PETG, built to hold real flowers, water and all.
Some vases just hold flowers. The Botella holds your attention first. Its surface is stacked with fine, wave-like ridges that ripple around a bottle-shaped body, narrowing gently through the middle…
Home & LivingBrisa Lamp
A vase-mode swirl of light for the nightstand, coffee table or reading nook, cast in glowing PLA+.
Brisa means breeze, and it shows. This table lamp captures a gust of wind mid swirl, its surface a continuous ribbon of waves that wrap around a rounded silhouette without…
Home & LivingBruno Desk Lamp
A softly scalloped shade that turns warm light into a honeycomb glow for reading nooks and night stands.
Named for the warm, easygoing glow it throws across a room, the Bruno is built from two simple shapes: a tapering cone base and a wider, gently flared shade that…
Home & LivingBrutalist Sphere
A barrel shaped shell of raised tiles, 3D printed in PLA+ to cast bold shadows.
Brutalist architecture never apologises for its shape, and neither does this lamp shade. The Brutalist Sphere is a barrel shaped shell wrapped edge to edge in a grid of raised…
Art & DecorBuenos Aires Cathedral - Argentina
A pocket sized Plaza de Mayo landmark for architecture lovers, well travelled shelves and gift givers alike.
Twelve fluted columns, a carved triangular pediment and a dome that catches the light just right: this tabletop replica captures the Metropolitan Cathedral of Buenos Aires in miniature, right down…
Home & LivingBull Bookend
Two muscular bulls, nose down and tail up, 3D printed in solid PLA+ to anchor your favourite reads.
Every serious bookshelf needs a serious anchor, and this charging bull pair means business. One bull lowers its head and horns as if it just spotted a stack of hardcovers…
Home & LivingButterfly
A pastel PLA+ vase with flared wings and ribbed curves, perfect for dried stems or a favourite succulent.
Look at it straight on and you will see it too: two flat, rounded wings flare out behind a fluted hourglass body, catching the light like something that just landed…
Home & LivingCacto Planter Pot
A 3D printed planter with a rippling cactus-rib texture, perfect for statement indoor greenery.
Some pots try to disappear into the background. This one refuses. The Cacto planter pot is 3D printed with a bold, wavy rib pattern running from base to rim, the…
Art & DecorCapitol - Dc, Usa
A finely detailed dome and colonnade in matte PLA+, perfect for history buffs and desk displays.
Some buildings are instantly recognisable, and the United States Capitol is one of them. This scale model brings the real building down to display size: a domed rotunda rising above…
Home & LivingCapullo Vase
A hand-sized 3D printed vase with an organic swirling texture, ideal as a planter cover or display piece.
Some shapes just feel right in the hand, and the Capullo Vase is one of them. Its rounded, tapering body is modelled on an insect cocoon: soft curves wrapped in…
Home & LivingCarla | Table Lamp E14 & E26/27
A hand-printed PLA+ shade that turns an ordinary bulb into a warm, glowing sculpture for your nightstand.
Picture a swirl of ribbon frozen mid-twist, wide at the shoulder, narrow at the neck, and lit from within. That is Carla: a table lamp whose spiral fluting wraps the…