Tio Hanger

Open most wardrobes and you will find one rail hook holding exactly one belt, while three more sit balled up in a drawer. The Tio Hanger fixes that with a single vertical strip of interlocking chevron notches, each one sized to catch a belt end or a tie loop on its own. Hook the curved top over the rail once and you can load five or six belts, ties or scarves down the one hanger without them sliding off or tangling together. It is 3D printed in tougher PETG Basic rather than a soft decorative plastic, because every notch gets flexed open and closed each time you add or remove an accessory, and the loaded hanger still has to carry the combined weight of everything hanging from it. The raw, matte finish shown here is straight off the print bed, no sanding required. Slot your everyday belts down one row of teeth and rotate ties or scarves through the rest, and a cluttered corner of the wardrobe becomes one tidy vertical column. It is a small fix that hands back real hanging space for jackets and shirts instead of loose belts draped over everything else. Printed to order in Australia and ready in one to two days, the Tio Hanger comes in a choice of colours, so it can blend in with your existing hangers or stand out as the one you always reach for first.