OzFDM PETG+ is our go-to workhorse for parts that need to survive the real world. Specially modified from standard PETG, it prints with noticeably less warping and no cracking, so you get the toughness and heat resistance PETG is known for without the usual fuss on the bed that puts a lot of makers off the material in the first place.

With sixteen colours in the range, it suits everything from functional brackets and enclosures to outdoor fixtures and everyday household prints: think plant pot holders and garden fittings that need to survive sun and rain, phone mounts and cable organisers around the house, storage boxes and drawer inserts, or replacement parts for appliances that need a bit more heat and impact resistance than PLA can offer. It sits happily between easy-going PLA and demanding engineering materials, making it a reliable choice for makers who want strength without a steep learning curve.

Because it's modified specifically to reduce warping and cracking, PETG+ is a good match for larger flat parts and outdoor pieces that would otherwise be prone to lifting off the bed or splitting along a layer line after a few weeks outside. It also holds up better than PLA to being left in a hot car or a sunny windowsill, which is worth keeping in mind for anything destined for outdoor or vehicle use.

Recommended nozzle: 210°C - 230°C
Recommended bed: 50°C - 70°C
Low warping, non-cracking, strong and heat resistant

Available now for local pickup from OzFDM.

1.75 mm PETG+ Filament - 1 KG